semi-complete weapon

Strap · Post by **Strap** » Fri Dec 12, 2003 2:42 pm

FN2000

it's without a grenade launcher/grip on the front, and there is no aiming fixture yet... but I made it and all with MS3d.
(remember that wierd gun in the stalker trailer, when the stalker was in some very dark area? that's the fn2000)

**edited for the sake of deviant art**

--now, could I get some comments

SuperH · Post by **SuperH** » Fri Dec 12, 2003 4:31 pm

You remote linked that to deviantart?
That's bad dude.
Real bad. Stop it, make it a regular link or host it somewhere else. Really.

evilmonkey · Post by **evilmonkey** » Fri Dec 12, 2003 7:01 pm

looks good -

and I agree with SuperH

if they see it over there you risk a ban etc, with reason as well.

atoga · Post by **atoga** » Sat Dec 13, 2003 5:26 am

Does deviantart actually get pissed if you link to them, or what? Enlighten me.

Anyway, nice stuff. Anything FN is automatically pretty cool anyway. You've done quite a good job on the barrel/front section of the gun.

Strap · Post by **Strap** » Sat Dec 13, 2003 6:53 am

I've finished the front grip and the scope, but rendering it just turns out crappy because I don't have a rendering program that supports "smooth shading" (the render above is not smoothshaded, and thus you can distinguish individual triangles. smoothshading makes things much prettier.)

anyone know of a free to cheap good rendering program? (besides 3dsmax, 'cause I can't run that on my comp.)

SuperH · Post by **SuperH** » Sat Dec 13, 2003 7:25 am

atoga wrote:Does deviantart actually get pissed if you link to them, or what? Enlighten me.

Yeah, as anyone who frequents it knows, that is a massively high bandwith site. They've got enough trouble keeping everything smooth contained within itself. If they catch you remote linking, which I'm sure is something they scan for, you might get a warning or something or they might just ban you.
Even if they didn't, it's common knowledge that remote linking sucks up resources from websites, and it's just a matter of respect not to do it to DevArt. Hell, it's one of the few respectable places on the interweb, they don't deserve to have people stealing their bandwith offsite.

And, as for the gun, it really does look good. Sorry I can't help with a renderer though, 3d graphics is one area I don't have the slightest bit of expertise in. I tried to use 3d studio a bit, but I'm no good at it. Maybe if I could find a good book that's not too expensive, but, then again, I've got no reason to 3d model so it'd end up being a waste of time and money.

The only other 3d program I ever tried though, is... what's the name... I donno I can't remember but it sucked. It tried to be more "user friendly" than 3ds, and just ended up being a jerk. Oh well.

Strap · Post by **Strap** » Sat Dec 13, 2003 7:45 pm

I am going to post the full thing on MS3d forums, in ocx viewer format... The render looks like crap when you can't smoothshade. (because the front grip is especially smooth)

Franz Schubert · Post by **Franz Schubert** » Sun Dec 14, 2003 6:41 am

SuperH wrote:I've got no reason to 3d model so it'd end up being a waste of time and money.

No, it's a great hobby, it impresses all your friends and family, and it's lots of fun.

evilmonkey · Post by **evilmonkey** » Sun Dec 14, 2003 1:05 pm

yeah - even if you do not plan to work in the field it is great fun if you can get passed some early hurdles.

like clay modelling *g*

time to finnish of my xmas gifts

WARIO in supersculpy for my cusin (12 year old wario freak)
SOMETHIN ABSTRACT in wax or SC for my uncle - perhaps some weird bridge as that is what he is designing for work.
HUMAN Head x 3 in SC to cover up for the rest of the gifts - ah they wouldn't understand too much thought anyway.

...and for some reason someting you can hold and turn inspires more wow then a drawing.

Strap · Post by **Strap** » Sun Dec 14, 2003 8:20 pm

This probably wont work, but what the heck

SuperH · Post by **SuperH** » Sun Dec 14, 2003 8:29 pm

Wow, very hardcore. I wonder if people with lower end computers / connecctions will appreciate that being embedded though? w/e it's still badassed.

Jeff · Post by **Jeff** » Sun Dec 14, 2003 8:35 pm

I'm lovin' it!!!
is that shaddam's hand gun

maybe the scope should have another tip though?

Strap · Post by **Strap** » Sun Dec 14, 2003 8:37 pm

Gimp Mask wrote:is that shaddam's hand gun

Don't think so... but even if it was, it wouldn't matter 'cause they just captured him

Thank you all for your Awe.

Gimp Mask wrote:maybe the scope should have another tip though?

It's for a game... so it wouldn't be visible... and thus I did not make one.
I do realize it should be there, but it would be pointless from the ingame aspect.

SuperH · Post by **SuperH** » Sun Dec 14, 2003 8:46 pm

So are you gonna texture it? And if so, can the texture be viewable through that same little control there?

Strap · Post by **Strap** » Sun Dec 14, 2003 8:51 pm

SuperH wrote:So are you gonna texture it? And if so, can the texture be viewable through that same little control there?

I absolutely hate lithunwrap. And I'm not about to buy its big brother Ultimate Unwrap 3d... So I probably wont be able to get a skin for it for some time...

If I did have a skin, it would be viewable with that viewer up there. (also toggleable)

Megatron · Post by **Megatron** » Sun Dec 14, 2003 10:04 pm

looks good

what game is it for yo?

that arrow/diamond thing on the side looks a bit gay, but if it's on the actual weapon then it's 'ALL BRAN'

Strap · Post by **Strap** » Sun Dec 14, 2003 11:17 pm

Megatron wrote:that arrow/diamond thing on the side looks a bit gay, but if it's on the actual weapon then it's 'ALL BRAN'

Heheh, it's on the real gun. It's one of those --don't know the gun lingo-- cocking levers. If you look at the g36, it's lever is similar to this one's in that you pull it out straight when pulling it, and when you're not, it's snug against the weapon and doesn't get in the way.

DeepOmega · Post by **DeepOmega** » Tue Dec 16, 2003 5:15 am

Do you want this to be low-poly or high-poly? Right now it's, er, middle-poly, and not very well balanced. Far too sharp, add some smoothing.

If low-poly: A lot of those pseudo-curved shapes (the clip, the ridges on top, the trigger guard) should get scrapped. Poly conservation my friend! Otherwise, you should really really strive for more natural curves. The clip is a great example. It makes a sharp angle in the center of it, clearly visible. The beveling on the edges near the front of the barrel is another good example - way too sharp. Smoothing really would help a lot. I'd like to see a view of the top, as well - one of the most commonly upfucked things in a 3D model of a weapon is the top profile, as nobody ever finds good references for it. Hope that's a start for ya =)

Smiley · Post by **Smiley** » Tue Dec 16, 2003 8:51 am

Very nice work! Looking forward to the texturized model!! =O

Nice idea with the show-off animation

Strap · Post by **Strap** » Tue Dec 16, 2003 3:18 pm

DeepOmega wrote:Do you want this to be low-poly or high-poly? Right now it's, er, middle-poly, and not very well balanced. Far too sharp, add some smoothing.

If low-poly: A lot of those pseudo-curved shapes (the clip, the ridges on top, the trigger guard) should get scrapped. Poly conservation my friend! Otherwise, you should really really strive for more natural curves. The clip is a great example. It makes a sharp angle in the center of it, clearly visible. The beveling on the edges near the front of the barrel is another good example - way too sharp. Smoothing really would help a lot. I'd like to see a view of the top, as well - one of the most commonly upfucked things in a 3D model of a weapon is the top profile, as nobody ever finds good references for it. Hope that's a start for ya =)

Could you see the viewer? It is completed and smothing groupes have been added. I don't have a rendering program that supports smooth shading so that's why the render at the top of the page looks so jagged.

I'll try to unwrap this when I get some more time, finals and all... bah.

Duck and Cover

semi-complete weapon

semi-complete weapon

Decent start.

Re: Decent start.