Post Apocalyptic Arms and Armor

Aonaran · Post by **Aonaran** » Sun Oct 16, 2011 3:48 pm

So I used up most of my time in my sculpture classes in college finding excuses to make post apocalyptic shit. I've made several suits of armor and a weapon or two, but have found that post-college I haven't been making very much in the way of art/sculpture. So, I decided to get back into it and wanted to create a centralized hub for all DaCers to post their crazy shit.

Aonaran · Post by **Aonaran** » Sun Oct 16, 2011 4:02 pm

Here is my first attempt, a post apocalyptic war hammer:

Still haven't added a lot of the detail work, but that is what I have so far. Since it is still in progress, I am open to suggestions. I was thinking a line of shell casings down the spine below the spikes, but am unsure at the moment.

Post by **King of Creation** » Sun Oct 16, 2011 4:18 pm

"Domain Unregistered.
To view, register at:
bit.ly/imageshack-domain"

I see this all the time, but can never be bothered to look up if there's anything I can do about it. Imgur seems to be the best image site nowadays anyways.

Edit: That means I can't see you pics

SenisterDenister · Post by **SenisterDenister** » Sun Oct 16, 2011 8:04 pm

It looks pretty cool, man. I'd be interested to see what grade you would get for this assignment, especially since it looks so damn rugged. Those rail-road spikes look intimidating as hell.

Aonaran · Post by **Aonaran** » Mon Oct 17, 2011 2:00 am

The hammer is more or less a prototype and my first real full blown weapon. My armors are where I've managed to make the most progress, as they were actually for a grade. I'm unsure if I should saw the handle off of the hammer. Also, I've got some rusty nails soaking in white vinegar to blast on the wood handle to give it that pleasing speckled dried-blood look.

SenisterDenister · Post by **SenisterDenister** » Mon Oct 17, 2011 3:37 am

I think keeping that as a two-handed weapon would keep it looking more intimidating, as well as just more aesthetically appealing.

Aonaran · Post by **Aonaran** » Mon Oct 17, 2011 4:49 am

Fair enough. I tried wielding it one-handed and the balance is just fucked. Agree it works better as a two-hander. It seems it needs some more flair below the hammer, but I'm dead-ending on actual ideas. Definitely might make a pommel at the base, as well as a hand loop out of an old fucked-up thrift store belt. Also the piston is too shiny, need to find a way to give it some realistic wear and tear without flat out coating it in nasty shit that will smear the rest of my get-up.

Post by **Retlaw83** » Mon Oct 17, 2011 5:32 am

Why not (lightly) bang it against some hard material to ding it up and make it look used?

Aonaran · Post by **Aonaran** » Mon Oct 17, 2011 6:25 am

I've given it some pretty fucked up abuse, but it is hickory that makes it a bit rough. The best technique I've found is to hit it hard enough to chip, tear the chip off then sand it smooth to create a pock mark. You can see one just to the left of the shorter spike in the last image. But yeah, more along the hilt would look good, I'm just squeamish about breaking the handle in two where it gets thin at the bottom. But fuck it, I'll play around with. Good call.

Edit: Just realized you were talking about the metal. I might try different hammers as well. I'd really like something to rub across the metal after I've pitted and scored it, accenting the wear and tear. Maybe apply some brake dust with a paint brush and rub it in with used motor oil. If I clear the excess with a clean rag, it should leave it relatively clean while highlighting the damage, making it look used. Might also steel wool some rusty metal and work the oxidized rust onto some of the surfaces.

SenisterDenister · Post by **SenisterDenister** » Mon Oct 17, 2011 8:13 am

As for flair you could put some knuckle guards around where you put your hands, like a trench-knife.

Post by **King of Creation** » Mon Oct 17, 2011 10:19 am

I still can't see the images

Tofu Man · Post by **Tofu Man** » Mon Oct 17, 2011 6:40 pm

They are visible, Koc. Try a proxy, maybe?

What's that on the back of the axe, that a piston head? Nice work, btw.

Cimmerian Nights · Post by **Cimmerian Nights** » Mon Oct 17, 2011 7:04 pm

Pretty cool, the only problem I see is once you smack a fool upside the head with those rail road spikes, it's going to be damn hard to pull it back out.

Tofu Man wrote:They are
What's that on the back of the axe, that a piston head? Nice work, btw.

Look how convex it is, could be a HEMI header, although I think they were notched for the DOHC.

Stalagmite · Post by **Stalagmite** » Mon Oct 17, 2011 7:39 pm

Centrifugal force plays a key role here, the heaviest, smallest metal you can find needs to be much heavier than the handle (but not too heavy so the handle breaks). More concentrated force = heavier hit. Looks nice, though, Anoran keep toying you'll be a full blown post apoc weapon designer for Bethesda's Fallout 4.

J/K Had ya for a sec though. Screw Bethesda.

Aonaran · Post by **Aonaran** » Mon Oct 17, 2011 9:54 pm

The hammer head is in fact a snowmobile piston. Will post pics of armor soon.

Tofu Man · Post by **Tofu Man** » Tue Oct 18, 2011 12:40 am

Actually, the thing I found odd was that it looked smaller than usual, although I'll admit I lack the necessary knowledge to make any assumptions.

Don't go using that as a hammer, now. :old man:

Megatron · Post by **Megatron** » Thu Oct 20, 2011 12:30 am

how does this relate to feminism in the 20th century :artschool:

Aonaran · Post by **Aonaran** » Fri Oct 21, 2011 2:43 am

...it crushes it.

Aonaran · Post by **Aonaran** » Fri Oct 21, 2011 3:00 am

Here is my first attempt:

Front:

Back:

Detail:

Detail 2:

Top:

If it looks a bit incomplete that's because it is. There was a license plate chest plate that screwed into one side and bucked at the top, hence the buckle at the top, but I ended up repainting it and incorporating it into another suit.

Aonaran · Post by **Aonaran** » Fri Oct 21, 2011 3:12 am

...and here is the other suit: